Icom IC-R6 - Starting Scan

VI
QUICK REFERENCE GUIDE
New2001
D Starting scan
1. Select the VFO mode.
Push [V/M] to select the VFO mode for a VFO scan opera-
tion, such as full scan, band scan and programmed scan.
• Select the memory mode by pushing [V/M] again for a memory
scan operation, such as all memory scan, bank link scan or bank
scan.
2. Selecting a scan type
Hold down [SCAN](MODE) for
1 second, and then rotate [DIAL]
to select one of the desired scan-
ning types.
• Select “ALL” for full scan, “BAND”
for band scan, “P-LINK x” for pro-
grammed link scan (x= 0 to 9),
“PROGxx” for programmed scan
(xx= 0 to 24; only programmed scan
edge numbers are displayed).
• Select “M-ALL” for all memory scan,
“B-ALL” for all bank scan, “B-LINK”
for bank link scan or “BANK-x” for
bank scan (x= A to R, T, U, W, Y; only
programmed bank groups are dis-
played).
• Full scan
• Band scan
• Program link scan
• Program scan
• All memory scan
• All bank scan
• Bank link scan
• Bank scan
Scan type display examples
In the VFO mode In the memory mode