Icom IC-R6 User Manual

28
6
SCAN OPERATION
New2001
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
■ Scan types
Scanning automatically searches for signals and makes it
easier to locate new stations.
FULL SCAN (p. 29)
100
kHz
1309.995
MHz
Scan
Jump
Repeatedly scans all frequen-
cies over the entire band.
Some frequency ranges are
not scanned, depending on
the frequency coverage of the
receiver version.
SELECTED BAND SCAN
(p. 29)
Band
edge
Band
edge
Scan
Jump
Repeatedly scans all fre-
que nci es ove r the e ntire
selected band.
ALL/SELECTED BANK
SCAN (p. 33)
SKIP
SKIP
A99
A03
A00 A01 A02
A04
A98
A05
Repeatedly scans all bank
channels or selected bank
channels. The skip scan is
also selectable.
FREQUENCY/MEMORY
SKIP FUNCTION (p. 35)
Band
edge
Band
edge
Scan
SKIP SKIP
Jump
Skips unwanted frequencies
or channels that inconven-
iently stop scanning. This
function can be turned ON
or OFF by pushing [FUNC] +
[ ](V/M) in either the VFO
or the memory mode.
PROGRAMMED SCAN
(p. 29)
Band
edge
xxA xxB
Band
edge
Scan edges
Scan
Jump
Repeatedly scans between
two user-programmed fre-
quencies. Used to check for
frequencies within a specified
range, such as repeater out-
put frequencies, etc.
MEMORY (SKIP) SCAN
(p. 33)
SKIP
SKIP
M 0
M 4
M 1 M 2 M 3
M 5 M 199 M 6
Repeatedly scans memory
channels, except those set as
skip channels. Skip channels
can be turned ON or OFF by
pushing [FUNC] + [ ](V/M)
in the memory mode.

Icom IC-R6 Specifications

General

Product color	Black
Channels quantity	1550 channels
Supported radio bands	AM, FM
Battery type	AA
Number of batteries supported	2
Impedance	16 Ω
Frequency range	0.1 - 1309.995 MHz
Product type	Portable CB radio
Housing material	-

Weight and Dimensions

Depth	29.8 mm
Width	58 mm
Height	86 mm
Weight	200 g