q
w
e
r
� Memory channel programming
Set a desired frequency and
other functions in the VFO mode.
Hold down [S.MW](V/M) for 1
second to enter the select
memory write mode.
• 1 short and 1 long beep sounds.
Rotate [DIAL] to select a desired
memory channel.
Hold down [S.MW](V/M) for 1
second to program the contents
into the selected channel.
• 3 beeps sound.
q
w
e
� Scan skip setting
Push [V/M] to select the
memory mode.
Rotate [DIAL] to select a desired
memory channel.
While holding down [FUNC],
push [ ](V/M) to set the skip
setting (skip channel or skip
frequency) ON or OFF.
q
w
� VFO scans
Push [V/M] to select the VFO
mode.
Hold down [SCAN](MODE) for 1
second.
• A scan type appears.
e
r
t
Rotate [DIAL] to select a
desired scan type.
Push [SCAN](MODE) to start
the scan.
•
Rotate [DIAL] to change the
scanning direction.
•
During scan, push [V/M] to start
the auto memory write scan.
Push [SCAN](MODE) again to
stop the scan.
q
w
� Memory scans
Push [V/M] to select the
memory mode.
Hold down [SCAN](MODE) for 1
second.
• A scan type appears.
e
r
t
Rotate [DIAL] to select a
desired scan type.
Push [SCAN](MODE) to start
the scan.
•
Rotate [DIAL] to change the
scanning direction.
Push [SCAN](MODE) again to
stop scan.
CE Versions of the IC-R6 which display the ‘CE’
symbol on the serial number label, comply with
the essential requirements of the European
Radio and Telecommunication Terminal Direc-
tive 1999/5/EC
81
17
CE
• List of Country codes (ISO 3166-1)
Country Codes Country Codes
1 Austria AT 18 Liechtenstein LI
2 Belgium BE 19 Lithuania LT
3 Bulgaria BG 20 Luxembourg LU
4 Croatia HR 21 Malta MT
5 Czech Republic CZ 22 Netherlands NL
6 Cyprus CY 23 Norway NO
7 Denmark DK 24 Poland PL
8 Estonia EE 25 Portugal PT
9 Finland FI 26 Romania RO
10 France FR 27 Slovakia SK
11 Germany DE 28 Slovenia SI
12 Greece GR 29 Spain ES
13 Hungary HU 30 Sweden SE
14 Iceland IS 31 Switzerland CH
15 Ireland IE 32 Turkey TR
16 Italy IT 33 United Kingdom GB
17 Latvia LV
To Next Page
Loading...
Need help?
General
Weight and Dimensions
