Icom ID-4100A

New2001
1
New2001New2001
INSTALLATION AND CONNECTIONS
1
BASIC MANUAL
■ Attaching the controller
D When attaching to the main unit
Attaching:
Slide the controller in the direction of the arrow until the
controller is locked and makes a ‘click’ sound.
Detaching:
1. Push the release button on the main unit. (q)
2. Slide the controller to the left (w), then pull it out. (e)
D When connecting to the main unit
Connect the controller to the main unit with the supplied
control cable.
L The following longer cables are usable, depending on the
installation location.
• OPC-440
mic extension cable: 5 m (16.4 ft)*
• OPC-647
mic extension cable: 2.5 m (8.2 ft)*
• OPC-1156
controller extension cable: 3.5 m (11.4 ft)*
• SP-30
external speaker: 2.8 m (9.1 ft)*
• SP-35
external speaker: 2 m (6.5 ft)*
• SP-35L
external speaker: 6 m (19.6 ft)*
*Approximate
Main unit
Controller
Place the unit’s
tabs into the
controller’s slots.
w
q
e
Release button
Main unit
Controller
Main unit
6-pin connector
6-pin connector