Icom ID-4100A - Lock Function; DR Function

24
3
BASIC OPERATION
New2001
3
BASIC MANUAL
■ Lock function
You can use the Lock function to prevent accidental
frequency changes and unnecessary function access.
Hold down [
] for 1 second to turn the Lock function ON or
OFF.
• “LOCK ON” or “LOCK OFF” is briey displayed when the Lock
function is turned ON or OFF.
L When the Lock function is ON and you operate the transceiver,
“LOCK” is displayed.
L You can still use [ ], [PTT], [SQL], [VOL] and [MONI], even if the
Lock function is ON.
■ DR function
The DR (D-STAR Repeater) function is for D-STAR repeater
operation. This function enables you to easily select the
preset repeaters and UR call signs by rotating [DIAL].
See the D-STAR Guide that comes with the transceiver for
details of registering your call sign at a gateway repeater, or
basic D-STAR operation.
1. Hold down [DR] for 1 second.
• Displays the DR screen.
2. Push [DR] several times until you select “FROM.”
3. Rotate [DIAL] to select an access repeater.
L To cancel the DR screen, hold down [DR] for 1 second.
[DR]
[ ]
[DIAL]