Icom ID-4100A - Removing the Microsd Card

49
7
RECORDING A QSO ONTO A microSD CARD
New2001 New2001
BASIC MANUAL
■ Removing the microSD card
q Push
w Pull out
D Removing the microSD card while the
transceiver’s power is ON
SD Card > Unmount
1. Push [MENU].
2. Rotate [DIAL] to select “SD Card,” then push [ï].
• Displays the SD CARD screen.
3. Select “Unmount,” then push [ï].
• The conrmation dialog “Unmount OK?” is displayed.
4. Select <YES>, then push [ï].
• When the unmounting is completed, “Unmount is completed.”
is briey displayed, then the display automatically returns to
the screen displayed before the “Unmount OK?” window.
5. Push in the microSD card until a click sounds, and then
carefully pull it out.
D Removing the microSD card
1. Turn OFF the transceiver.
2. Push in the microSD card until a click sounds, and then
carefully pull it out.
Front panel
(Main unit)
NOTE: DO NOT remove the card from the transceiver
while the card is being accessed. Otherwise, the card data
may be corrupted or deleted.