Icom ID-4100A - Setting and Clearing a Skip Channel

46
6
SCAN OPERATION
New2001
6
BASIC MANUAL
You can set or clear a Skip channel setting.
The channels that are set as a Skip channel are skipped
during a scan.
1. Push [V/M] several times until you enter the Memory
mode.
2. Rotate [DIAL] to select the Memory channel.
3. Push [QUICK].
4. Rotate [DIAL] to select “SKIP,” then push [ï].
5. Select the option, then push [ï].
• OFF: Cancel the skip setting.
• SKIP: Skipped during a memory scan.
• PSKIP: Skipped during both VFO and memory scans.
• When a Skip channel is set, “SKIP” or “PSKIP” is displayed.
■ Setting and clearing a Skip channel
[MENU]
[DIAL]
[ ]
[QUICK][V/M]