Icom ID-4100A - Front;Rear Panel; Main Unit - Front Panel; D Microphone Connector Information; Microsd Card

14
2
PANEL DESCRIPTION
New2001
2
BASIC MANUAL
■ Main unit — Front panel
1microSD CARD SLOT [micro SD] (p. 48)
Insert a microSD card (user supplied).
2CONTROLLER CONNECTOR (p. 1)
Connect to the controller using the supplied control cable.
3MICROPHONE CONNECTOR
Connects the supplied or an optional microphone.
D Microphone connector information
12345678
Front panel view
PIN
No.
NAME DESCRIPTION SPECIFICATIONS
1 8 V +8 V DC output Maximum 10 mA
2 MIC U/D Frequency Up/Down
UP: Ground
DN: Ground
through 470 ˘
3 M8V SW
Grounds when
the HM-207S is
connected
—
4 PTT PTT input
Ground for
transmission
5 MIC E Microphone ground —
6 MIC Microphone input —
7 GND PTT ground —
8 DATA IN
When the HM-207S
is connected, inputs
HM-207S data
—
q w e