Icom ID-4100A - Quick Menu Window

20
3
BASIC OPERATION
New2001
3
BASIC MANUAL
New2001
■ Quick Menu window
You can open the Quick Menu window by pushing [QUICK].
In the window, the selectable items differ, depending on
the operating mode or function. The items listed below are
examples.
D Quick Menu window operation
[DIAL]
Selects an item
or option.
[QUICK]
Toggles between Quick Menu
window and the standby screen.
[ï]
• Sets an option.
• Goes to a next
tree level.
Simplied description—‘Select’ operation
In this manual, user’s ‘Select’ operation is simplied.
Simplied description:
1. Push [QUICK].
2. Select “TX Power,” then push [ï].
Operation:
1. Push [QUICK] to open the Quick Menu window.
2. Rotate [DIAL] to select “TX Power,” then push [ï].
VFO mode Memory mode Call CH mode DR function
Band Select Bank Select TX Power Group Select
TX Power*
1
TX Power*
1
DUP Repeater Detail
DUP DUP TONE*
1
TX Power
TONE*
1
*
2
TONE*
1
*
2
TS DTMF TX
MHz TS DTMF TX Voice TX
TS SKIP Voice TX RX History
DTMF TX DTMF TX RX History*
3
GPS Information
Voice TX Voice TX GPS Information GPS Position
RX History*
3
RX History*
3
GPS Position
Weather
Information*
4
GPS Information GPS Information
Weather
Information*
4
PRIO Watch
GPS Position GPS Position PRIO Watch Weather CH
*
5
Weather
Information*
4
Weather
Information*
4
Weather CH *
5
Weather Alert *
5
PRIO Watch PRIO Watch Weather Alert *
5
Home CH Set
Weather CH
*
5
Weather CH *
5
Display Type DSQL
Weather Alert
*
5
Weather Alert *
5
Clock SKIP
Home CH Set Home CH Set Voltage Clock
Clock Display Type Band Scope Voltage
Voltage Clock <<REC Start>> <<REC Start>>
Band Scope Voltage
<<REC Start>> Band Scope
<<REC Start>>
*
1
Disappears in the AM mode.
*
2
“DSQL” is displayed in the DV mode.
*
3
Displayed in only the DV mode.
*
4
Displayed when the D-PRS TX format is set to “Weather.”
*
5
Displayed in only the USA version transceivers.