Icom ID-4100A - 10 Specifications

New2001
57
New2001New2001
SPECIFICATIONS
10
BASIC MANUAL
D General
• Frequency coverage:
EUR Receive
118 ~ 174 MHz (Guaranteed only 144 ~ 146 MHz)
230 ~ 550 MHz (Guaranteed only 430 ~ 440 MHz)
Transmit
144 ~ 146 MHz, 430 ~ 440 MHz
ITR Receive
118 ~ 136.99166 MHz (Not guaranteed),
144 ~ 146 MHz, 430 ~ 434 MHz, 435 ~ 438 MHz
Transmit
144 ~ 146 MHz, 430 ~ 434 MHz,
435 ~ 438 MHz
USA Receive
118 ~ 174 MHz (Guaranteed only 144 ~ 148 MHz)
230 ~ 550 MHz (Guaranteed only 430 ~ 450 MHz)
Transmit
144 ~ 148 MHz, 430 ~ 450 MHz
EXP Receive
118 ~ 174 MHz (Guaranteed only 144 ~ 148 MHz)
230 ~ 550 MHz (Guaranteed only 430 ~ 440 MHz)
Transmit
137 ~ 174 MHz (Guaranteed only 144 ~ 148 MHz)
400 ~ 470 MHz (Guaranteed only 430 ~ 440 MHz)
• Mode: F2D/F3E (FM/FM-N), F7W (DV),
A3E (AM/AM-N) RX only
• No. of memory channels: 1000 channels
• No. of program scan channels:
50 channels
( 2 channels × 25 pairs)
• No. of call channels: 4 channels
(2 channels × 2 bands)
• No. of repeater lists: 1500
• No. of GPS memory: 300
• Antenna impedance: 50 Ω (SO-239)
• Usable temperature range: –10˚C to +60˚C
(+14˚F to +140˚F)
• Frequency stability: ±2.5 ppm (–10˚C to +60˚C, +14˚F
to +140˚F) at +25˚C (+77˚F)
• Digital transmission speed: 4.8 kbps
• Voice coding speed: 2.4 kbps
• Frequency resolution: 5 kHz, 6.25 kHz, 8.33 kHz*,
10 kHz, 12.5 kHz, 15 kHz,
20 kHz, 25 kHz, 30 kHz, and
50 kHz
* Selectable depending on the
operating band or mode.
• Power supply: 13.8 V DC ±15%
(negative ground)
• Current drain:
Transmit
Maximum current drain: ≤ 13.0 A (at High)
≤ 7.5 A (at Mid)
≤ 5.0 A (at Low)
Receive
Standby: ≤ 0.9 A
Maximum audio: ≤ 1.2 A
• Dimensions: 150(W) × 40(H) × 171.9(D) mm
5.9(W) × 1.6(H) × 6.8(D) inch
(projections are not included)
• Weight (approximate): 1.2 kg, 2.6 lb
( microphone, cable, and bracket
are not included)