Icom ID-4100A

12
2
PANEL DESCRIPTION
New2001
2
BASIC MANUAL
AUTO POWER OFF ICON
Displayed when the Auto power OFF function is ON.
GPS ICON
• Displays the status of the GPS receiver. (p. 51)
•
is displayed when you set the GPS alarm.
microSD CARD ICON (p. 48)
• Displayed when a microSD card is inserted.
• Blinks while accessing the microSD card.
RECORD ICON
•
: Displayed while the transceiver is recording.
•
: Displayed while the recording is paused.
VOX ICON
Displayed when the transceiver is connected to the
optional VS-3
Bluetooth
®
headset, and the VOX function
is ON.
Bluetooth ICON
Displayed when the transceiver (UT-137
Bluetooth unit is
installed) connects to a Bluetooth
®
device.
L See the Advanced manual for details. (Section 12)
EMR/BK/PACKET LOSS/AUTO REPLY ICONS
• EMR: Displayed when you select the Enhanced
Monitor Request (EMR) mode.
• BK: Displayed when you select the Break-in (BK)
mode.
• L: Displayed when packet loss has occurred.
•
: Displayed when you select the Automatic Reply
function. (p. 33)
WEATHER ALERT ICON
Displayed when the Weather Alert function is ON.
(Only the USA version transceiver)
PRIORITY ICON
Displayed when Priority watch is turned ON.
TONE ICONS
Mode: FM/FM-N
• TONE: Enables the subaudible tone encoder.
• TSQLS: Enables the tone squelch with the Pocket
Beep function.
• TSQL: Enables the Tone Squelch function.
• DTCSS: Enables the DTCS squelch with the Pocket
Beep function.
• DTCS: Enables the DTCS Squelch function.
• TSQL-R: Enables the Reverse Tone Squelch
function.
• DTCS-R: Enables the Reverse DTCS Squelch
function.
• DTCS(T) (“DTCS” blinks):
When you transmit, the selected DTCS
code is superimposed on your normal
signal.
When you receive, the function is OFF.