Icom ID-52A PLUS - Page 3

3
■ System requirements (As of July 2024)
Software / Application System requirements
When you use a PC
RS-MS3W
Operating system
Microsoft Windows 11 (64 bit)
Microsoft Windows 10 (32/64 bit)
L Except for Windows on ARM.
USB port
A USB 1.1 or USB 2.0
When you use a Android
device
RS-MS3A
Data device for Android™
• Android™ version 8.0 or later
The RS-MS3A has been tested with Android 8.x, 9, 10, 11, 12, 13 and 14.
L If your device is Android version 5.x.x to 7.XX, you can use RS-MS3A version 1.32, but
cannot update RS-MS3A.
L If your device is Android version 4.x.x, you can use RS-MS3A version 1.20, but cannot
update RS-MS3A.
• USB host function on the Android™ device or Bluetooth function on the Android
device
L The USB host function is needed to use a USB device with an Android device. To check
whether or not your Android device has the USB host system, ask the Android device’s
manufacturer.
L Bluetooth connection is compatible with only the ID-52A PLUS/ID-52E PLUS.
L Display indications may differ depending on the PC or Android device’s OS.
L In addition to this document, read the RS-MS3W or RS-MS3A instruction manual. They can be downloaded from the Icom
website.