Icom IP730D - D 4 G (Lte);3 G (W-Cdma); D General; D Idas

7
FOR YOUR REFERENCE
7-2
Specications
L Measurements made without an antenna�
L All stated specications are subject to change without notice or obligation�
D General
• Antenna impedance (For IDAS): 50 Ω nominal
• Input impedance (MIC): 2�2 k Ω
• Output impedance (audio): 8 Ω
• Audio power output:
Internal speaker
External speaker
HM-222H*
1300 mW typical (at 5% distortion into an 8 Ω load)
650 mW typical (at 5% distortion into an 8 Ω load)650
1300 mW typical (at 5% distortion into an 8 Ω load)
• Operating temperature range: –30°C ~ +60°C (–22ºF ~ +140ºF)
• Power supply voltage: 7�5 V DC nominal
• Current drain (approximately):
RX stand-by
RX max� audio
TX High (5 W)
300 mA
520 mA (Internal speaker)
1�8 A
• Dimensions: 61�7 (W) × 42�8 (D) × 140�5 (H) mm,
2�4 (W) × 1�7 (D) × 5�5 (H) in (with BP-303)
• Weight (approximately): 320 g, 11�3 oz (with BP-303)
D 4G (LTE)/3G (W-CDMA)
• Frequency band:
USA version
EUR/EXP-02
version
AUS/EXP-01
version
LTE Band 2, 4, 12
W-CDMA Band 2, 5
LTE Band 1, 3, 7, 8, 20
W-CDMA Band 1, 8
LTE Band 1, 3, 5, 7, 8, 28
W-CDMA Band 1, 5
• Modulation: QPSK, 16QAM, 64QAM
• Rated output power: 0�25 W
• Receiver sensitivity (QPSK): –95 dBm maximum, –102 dBm typical
D IDAS
• Frequency range: IP730D
IP740D
136 MHz ~ 174 MHz
350 MHz ~ 470 MHz, 400 MHz ~ 520 MHz
• Number of conventional channels: 128 ch / 8 Zone
• Type of emission:
USA version
EUR/EXP/AUS
version
11K0F3E (15�0kHz), 4K00F1E, 4K00F1D (6�25 kHz)
8K50F3E (12�5kHz), 4K00F1E, 4K00F1D (6�25 kHz)
*The optional HM-222H is not released as of August 2020�