EasyManua.ls Logo

Icom IP730D - D Receiver; D Transmitter

Icom IP730D
52 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7
FOR YOUR REFERENCE
7-3
Specications (Continued)
D Transmitter
• Rated output power: 5 W (High), 2 W (Low 2), 1 W (Low 1)
• Modulation: Frequency modulation, FSK modulation
• Frequency error: ±1�0 ppm
• Spurious emissions:
USA/EXP version
EUR/AUS version
70 dB minimum� 90 dB typical
0�25 uW (Less than 1GHz),
1�0 uW (More than 1GHz)
• Adjacent channel power: IP730D
IP740D
60 dB minimum 70 dB typical
60 dB minimum 64 dB typical
• FSK Error: 5 % maximum, 1 % typical
• FM Hum and Noise: 34 dB minimum, 60 dB typical (Without CCITT Filter)
D Receiver
• Sensitivity: IP730D
USA/EXP version
EUR/AUS version
IP740D
USA/EXP version
EUR/AUS version
0�32 uV maximum (at 12 dB SINAD)
0�22 uV typical (at 12 dB SINAD)
0�0 dBuVemf maximum (at 20 dB SINAD)
–2�0 dBuVemf typical (at 20 dB SINAD)
0�32 uV maximum (at 12 dB SINAD)
0�17 uV typical (at 12 dB SINAD)
0�0 dBuVemf maximum (at 20 dB SINAD)
–2�0 dBuVemf typical (at 20 dB SINAD)
• Adjacent channel selectivity: 60 dB minimum, 67 dB typical
• Intermodulation: IP730D
USA/EXP version
EUR/AUS version
IP740D
USA/EXP version
EUR/AUS version
70 dB minimum, 74 dB typical
65 dB minimum, 67 dB typical
70 dB minimum, 72 dB typical
65 dB minimum, 66 dB typical
• Hum and Noise: 34 dB minimum, 60 dB typical
(Without CCITT Filter)
D Bluetooth
• Version: 4�2
• Output power: Class 2
• Prole: HFP, HSP
• Modulation: GFSK,
π/4-DQPSK, 8DPSK

Table of Contents