1.1 Common Features
• 200 amps peak system current rating / 100 amps per bus
• Six independently controlled and monitored output channels per
bus
• Independent form-C alarm contacts for each bus
• High-quality, reliable hydraulic/magnetic breakers support 12-, 24-
and 48-volt DC applications
• Mixed voltages and polarities can be supported in one panel
• −30 to +60 °C operating temperature range
• 2-year warranty
1.2 Intelligent Models
• TCP/IP remote management and power control of system and
individual outputs
• On-board web server means no software to maintain
• Easy to use GUI
• Remote firmware update capability
• HTTPS, SMTP, SNMP (v1, v2c, v3), TLS 1.2 protocols supported
• Monitoring and alarm reporting of each output
• Alarms can be sent to multiple e-mail accounts
• Each output has adjustable load-shedding settings
• Network watchdog
• Five digital inputs for site monitoring sensors
• Data logging
• Password protection
2.0 INSTALLATION
Risk of serious personal injury or damage to equipment and
property. Always observe the following:
• Shut off or disconnect all DC power sources before
connecting or disconnecting wiring.
• Carefully observe wiring polarity when making input and
output connections.
• Securely tighten all connections.
Risk of personal injury or damage to equipment and
property. Always observe the following:
• Use wire and connectors rated for the maximum load
current and size of fuse or circuit breaker in accordance with
NEC Section 210.20(A) and keep cable lengths as short as
practical.
To Next Page
Loading...
Need help?
General
