ICT Distribution 3 Series User Manual

Distribution Series 3 Dual Bus
855-314-002_Rev2.0_Instruction Manual
Page 18 of 46
4.4 Device Setup
Use this tab to configure the unit’s name, set the date and time and enable
the watchdog timer and data logging features.
Device Info
Site Name: Enter a descriptive name for the system. This name will be
used in all e-mail messages.
Model: Shows the model number of the unit.
Hardware: Shows the hardware version.
Date and Time Settings
Current System Time: Shows the current system date and time.
Synchronize with NTP Server: Select the check box to synchronize
with NTP Server. The default is Enabled.
NTP Server: Set an NTP server address here (i.e., time.nist.gov) to
automatically load network time.
Time Zone: Set the time zone this unit will be using.
Set Time Manually: Select the check box to enable manually setting the
time and date. The default is Disabled.

ICT Distribution 3 Series Specifications

General

Brand	ICT
Model	Distribution 3 Series
Category	Power distribution unit
Language	English