Need help?Do you have a question about the ID Technology 252 and is the answer not in the manual?
Overview of manual's purpose and importance of following instructions.
Procedures for checking and tightening fasteners after initial installation and use.
Explanation of universal danger, warning, and information symbols used in the manual.
General safety guidelines for operating and maintaining equipment.
Specific safety precautions for servicing and maintaining the machinery.
Safety guidelines for electrical maintenance and troubleshooting procedures.
Procedures and precautions for safely cleaning the machinery.
Description of the Model 252 label printer/applicator and its capabilities.
Explanation of the unwind assembly's function and components for label stock.
Explanation of the rewind assembly's purpose for accumulating waste liner.
Description of the electronics assembly's role in controlling applicator functions.
Overview of optional components that can enhance applicator functionality.
Technical details including features, dimensions, weight, electrical, and air requirements.
Instructions and safety precautions for safely lifting and moving the applicator.
Guidance on assembling various stand options for applicator mounting.
Procedures for attaching the applicator to the stand assembly.
Specific instructions for mounting the 252E model using U-arm or pedestal base.
Steps for installing various optional accessories onto the applicator.
Description of the initial display upon powering up the applicator.
Overview of the main menu structure and icon-based controls.
How to view the current machine operation settings and status indicators.
Information on accessing and managing security settings, including PIN entry.
Step-by-step guide on how to load labels onto the applicator.
Configuration options for the vacuum generator's operation modes.
Setting the print sequence and operation modes for the print engine.
Configuration options for different label application methods (Tamp, Tampjet, etc.).
Procedure for adjusting the physical position of the tamp pad relative to the peel tip.
How to adjust air pressure settings for various applicator components.
Process for saving current applicator settings into memory buffers.
Steps to load previously saved configurations from memory buffers.
A table for recording current system settings and parameters.
Overview of dual panel modes and configuration options for applying labels to adjacent panels.
Recommended periodic maintenance tasks and their frequency.
Guidelines for thorough cleaning and inspection of the applicator unit.
Common problems, possible causes, and remedies for applicator issues.
Technical drawings showing dimensions for the standard tamp module.
Technical drawings illustrating the basic dimensions of the 252N model.
Technical drawings detailing the basic dimensions of the 252E model.
Technical drawings showing dimensions for the 252E model with U-Arm mounting.
Technical specifications and details for the MiniBeam photocell sensor.
General| Print Technology | Thermal Transfer |
|---|---|
| Resolution | 300 dpi |
| Connectivity | USB, Ethernet |
| Media Type | Labels, Tags |
| Operating System Compatibility | Windows |
To Next Page
