ID Technology 252 - Maintenance Schedule

Model 252
Label Printer/Applicator
Operators/Technical Manual
1
1. Maintenance Schedule
Disconnect power for all steps unless necessary for inspection of component
functionality. Do not operate machine without guards in place.
The maintenance schedule shown is a suggested timetable based on a single shift five day
week operation under normal operating conditions. Schedule should be accelerated when
operating under multi-shift or harsh environments. Blank lines have been provided for
additional items as required. See the print engine manual for recommended print engine
maintenance schedule.
TASK
ROLL
CHANGE
WEEK
MONTH
PARA.
1
Blow off paper dust
X
2
Clean Photocell
X
3
Clean Drive Roller
X
4
Clean Peel Tip
X
5
Clean adhesive residue from web
path
X
6
Check all fasteners
X
7
Check belts and bearings for wear
X
8
Check Tamp Pad
X
9
Drain Filter Regulator
X
10
Inspect Hoses and Fittings
X
11
Clean platen roller and printhead
X
12
13
14
15
16
17
18
19
20
21
22
23
24
25