Idexx VetTest User Manual

B–8
IDEXX VetTest* Chemistry Analyzer Operator’s Manual
Printout Settings
The VetTest analyzer has its own internal printer. You can also connect to an external
printer (see Connecting Your PrinterQBHF#'PMMPXUIFPOTDSFFOJOTUSVDUJPOTGPS
each printing option to adjust the printer, depending on your configuration.
Paper Cuttingt —For use with the internal VetTest printer only. This option sets the
number of blank lines that appear after the results print.
Clinic Name/Address (full-page printout only)t —This option lets you enter
ZPVSDMJOJDhTOBNFBOEBEESFTTTPFBDIGVMMQBHFSFQPSUPOUIFFYUFSOBMQSJOUFS
is personalized. (For information on entering alphanumeric text on the VetTest
analyzer screen, see Connecting an External KeyboardQBHF#
Print Interpretationt —This option lets you turn on or off the automatic printing of
the Profile Interpretation, a list of suggested conditions that may be consistent with
the results reported (available for dogs and cats only). When set to off, you can
choose to print the Profile Interpretation following a sample analysis by choosing
the “Print Interpretation” option.
Letterhead Lines (full-page printout only)t —This option sets the number of
blank lines at the top of each printout so you can use your own letterhead.
Connecting Your Printer
Note: Not all printers are compatible with the VetTest analyzer. To ensure compatibility
with future software updates, contact IDEXX Technical Support for a list of compatible
printers.
If you are connecting a printer to your VetTest analyzer, you must set the communication
switches on the printer to allow communication with the VetTest analyzer. Refer to
directions supplied with the printer for initial setup. Contact IDEXX Technical Support for
additional assistance.
To attach a printer to the VetTest analyzer:
Remove the metal cover over the communications panel on the back of the 1.
7FU5FTUBOBMZ[FS'JHVSF#
Plug the printer cable into the port labeled “Printer.” Make sure to use a parallel 2.
printer cable.
Connecting an External Keyboard
5IF7FU5FTUBOBMZ[FSBMMPXTZPVUPJOQVUUIFOBNFBOEBEESFTTPGZPVSDMJOJDJOBPOF
time operation so you can customize the printouts on the external printer. In addition,
patient identification can accommodate letters, numbers, or a combination of both (e.g.,
“Snappy101”). Contact IDEXX Technical Support for a list of compatible keyboards.
To connect an external keyboard:
Turn off the VetTest analyzer.1.
If you have not already done so, remove the metal cover over the communications 2.
QBOFMPOUIFCBDLPGUIF7FU5FTUBOBMZ[FS'JHVSF#
Refer to the instructions inside the keyboard container for proper switch setting.3.
Plug the external keyboard into the “KBD” on the back of the VetTest analyzer.
Turn on the VetTest analyzer.
When a keyboard is attached to the VetTest analyzer, you can use either this external
keyboard or the VetTest keypad to operate the analyzer.

Idexx VetTest Specifications

General

Brand	Idexx
Model	VetTest
Category	Measuring Instruments
Language	English