B–2
IDEXX VetTest* Chemistry Analyzer Operator’s Manual
Precautions
Nevert use the VetTest analyzer with the transit clamps in position.
Do nott stack other equipment or containers on top of the VetTest analyzer.
Keep the VetTest analyzer away from sources of heat or flames (e.g., Bunsen t
burners).
Do nott QMBDFPSPQFSBUFUIF7FU5FTUBOBMZ[FSOFBS9SBZFRVJQNFOUQIPUPDPQJFST
or other devices that generate static or magnetic fields (e.g., transformers).
Protectt the analyzer from damp conditions or wet weather.
Take care not to spill water or other fluids on the analyzer.t
Do nott use any of the following liquids, abrasives, or aerosol sprays on or near
the VetTest analyzer, as they may damage the outer case and may influence the
analysis results:
– Organic solvents – Insecticides
o "NNPOJBCBTFEDMFBOFST – Disinfectant
– Ink markers – Polish
– Sprays containing volatile liquids – Room freshener
Important Electrical Safety Precautions
Always use the correct AC electrical source.t
Use only the power cable supplied.t
Disconnect the power plug:t
If the power cord or plug becomes frayed or otherwise damaged –
If anything is spilled onto the equipment –
If your equipment is exposed to rain or any excessive moisture –
If your equipment is dropped or the case has been damaged –
If you suspect that your analyzer needs service or repair –
Whenever you clean the case –
Unpacking the Analyzer
The VetTest analyzer is a highly sophisticated piece of equipment and care should be
taken not to damage any of the sensitive components when unpacking and handling it.
The shipping carton should contain the VetTest analyzer, paper roll cover, and paper roll.
:PVMMmOEUIFQJQFUUPSBOEUIFQBQFSSPMMIPMEFSJOTJEFUIFVTFETMJEFESBXFSTFF'JHVSF
#7FU5FTUBOBMZ[FSGSPOUWJFXPOQBHF#5IFDBSUPOBMTPDPOUBJOTUIFGPMMPXJOH
Dust covert
Power cordt
Operator's Manualt
Warranty and return envelopet
Installation certificate and return envelopet
Software diskt