J Specifications and Warnings
Power Input
oWPMUT"$o)FSU["NQFSF
Warnings
5IF7FU5FTU$IFNJTUSZ"OBMZ[FSDPOUBJOTOPVTFSTFSWJDFBCMFDPNQPOFOUTDo not
attempt to disassemble the analyzer. Call IDEXX Technical Support for any service
issues.
To avoid electric shock hazard, the protective grounding conductor to the power cable
must be connected to ground. Use only the power cable that is supplied with the unit.
The VetTest analyzer contains moving parts that are accessible to the user during
cleaning. Disconnect the power before cleaning. Refer to the cleaning instructions in
this manual for the correct procedure.
Ultraviolet lamps are visible when servicing the rotor/disc assembly. Use care when the
cover is removed. Always replace the cover before operating the analyzer.
IEC protection Class B.
INPUT: Alternating current only.
Interference with Radio Communications
This equipment generates, uses, and can radiate radio frequency energy. If not
installed and used in accordance with this manual, the analyzer may cause interference
to radio communications. It has been tested and found to comply with the limits for a
$MBTT"DPNQVUJOHEFWJDFQVSTVBOUUPTVCQBSU+PS1BSUPGUIF'$$SVMFTXIJDIBSF
designed to provide reasonable protection against such interference when operated
in a commercial environment. Operation of this equipment in a residential area may
cause interference in which case the user, at his own expense, will be required to take
whatever measures may be required to correct the interference.
J–1
To Next Page
Loading...
Need help?
General
