To Next Page

To Previous Page

E Advanced Operations

Out-of-Linearity Range Samples

Occasionally a test value may be outside the analyzer’s range capability. The test value

may be greater than (>) the linearity range, or interfering substances in the sample

may be causing a nonlinear or invalid result. See the following chart for linearity ranges

on individual chemistries. If a value is required, it will be necessary to dilute the sample

and repeat the test.

Note:0OBOFYUFSOBMQSJOUFSBOPVUPGMJOFBSJUZSFTVMUJTEJTQMBZFEBTEBTIFT

A dilution message is printed on the internal VetTest* printer results.

Analyzer Linearity Range

Test U.S. Units S.I. Units

ALB o g/dL o g/L

ALKP 10–2000 U/L 10–2000 U/L

ALT 10–1000 U/L 10–1000 U/L

AMYL o U/L o U/L

AST 0–1083 U/L 0–1083 U/L

CA o mg/dL o mmol/L

CHOL o mg/dL o mmol/L

CK o U/L o U/L

CREA o mg/dL 0–1202 ÚNPM-

GGT o U/L o U/L

GLU o mg/dL 0–38.1 mmol/L

LAC o mmol/L o mmol/L

LDH o U/L o U/L

LIPA o U/L o U/L

MG o mg/dL o mmol/L

NH3 o ÚNPM- o ÚNPM-

PHOS o mg/dL o mmol/L

TBIL o mg/dL o ÚNPM-

TP 0–12.0 g/dL 0–120 g/L

TRIG o mg/dL o mmol/L

UREA 0–130 mg/dL o mmol/L

URIC 0.1–20 mg/dL o ÚNPM-

UCRE o mg/dL o g/L

UPRO o mg/dL o g/L

E–1

Idexx VetTest User Manual

Questions and Answers: