5
UK
when installation is correctly carried out� The installation and connection must
comply with the applicable national and international standards� Responsibility lies
with the person installing the device�
This is a class A product which is intended for use in industrial applications�
The unit may cause radio interference in domestic areas� In this case it can
be necessary for the user to take appropriate measures�
2.3 Tampering with the device
Tampering with the device is not allowed and will lead to an exclusion of liability
and warranty� Tampering with the device can affect the safety of operators and
machinery�
3 Functions and features
The parameters of the device are mainly set via the VES004 PC software�
The device manual can be found at www�ifm�com
Monitoring of
• 2 sensor-internal characteristic vibration values (a/v, RMS/peak)
• 2 external characteristic vibration values (a/v, RMS/peak via VNA001
accelerometer) or two external process values (current value above and/or
below limit value)
Visualisation of
• Measured values
• Switching states
• Measured data via PC software
To Next Page
Loading...
