Imi Tech IMB-7017G - 2 Basic Installation

AMAZON SERIES Operation Manual
Page 11
Pioneer i n D i g i t al V is io n Technol og y
2. Basic Installation
The Amazon series operates in connection with a PC that is running an operation system such as MS Windows.
Basic installation starts by installing the driver, connecting the camera and loading the demo application software.
Please refer to the demo application software manual for details.
2.1. Recommended System Requirement
Requirements
Details and Description
Operating System
Windows XP, Window 7
CPU
Intel Core2quad or better spec
System Memory
2GB or more
Video Adapter
1280 x 1024 with 24 bit color or higher
Hard Disk Drive
40 GB or higher
Optical Drive
CDROM or DVDROM
Gigabit Ethernet Interface
On
Cable
Standard Gigabit Ethernet Cable (RJ45)
Power Supply
DC 8V ~ 30V.
Software
DirectX 9.0 or higher, IMI Tech Digital Imaging CD
Remark: Other software or hardware may be required for user specific applications.
2.2. Hardware Installation
Basic camera installation is a very simple 3 step process as follows. ( Also check the figure below. )
Step 1. Locate the Gigabit Ethernet port on the computer.
(Note : Some computers would require the installation of a PCI/ PCI express Gigabit Ethernet interface. ).
Step 2. Plug one end of the GigE cable into the camera; and the other end of the cable into the computer’s Gigabit
Ethernet port.
Basic
Hardware Installation
and
Camera Connection