AMAZON SERIES Operation Manual
Pioneer i n D i g i t al V is io n Technol og y
Before Image (before 4 points LUT)
After Image (after 4 points LUT)
5.6.2. User defined lookup table
The user can set defined points (data file) for the images and apply them to the LUT. User’s defined LUT running
procedure is as follows. LUT index is N(0~15). The total index number of user’s defined LUT is 16, but only one
user defined LUT is used at a time.
Priority: User’s defined LUT > 4 point LUT > Features (Brightness, Sharpness and Gamma)
To Next Page
Loading...
