Inateck BCST-43 - Auto Sleep

Enter Setup
Exit and Save
10
Set Data Transmission Interval as 32ms
Set Data Transmission Interval as 64ms
Set Data Transmission Interval as 96ms
Set Data Transmission Interval as
128ms
Set Data Transmission Interval as 256ms
Auto Sleep
To save battery, you may set the interval for the scanner to enter auto sleep
mode. The preset interval is 10 minutes.
(*) Enable Auto Sleep
Disable Auto Sleep
Set Auto Sleep Interval as 1min
Set Auto Sleep Interval as 3min
Set Auto Sleep Interval as 5min
(*)Set Auto Sleep Interval as 10min