After you set the "Code 11 with 1-digit Checksum" function, the scanner will take
the last one digit of the data as checksum and won't be able to read Code 11
without checksum or Code 11 with 2-digit checksum.
After you set the "Code 11 with 2-digit Checksum" function, the scanner will take
the last two digits of the data as checksum and won't be able to read Code 11
without checksum or Code 11 with 1-digit checksum.
After you set the "Transmit Code 11 Checksum" function, the scanner will take the
last 1 or 2 digit(s) of the regular data as the checksum to transmit. The scanner
defaults the "Code 11 Transmit Checksum" setting.
Scan the "Do not Transmit Code 11 Checksum" barcode and the scanner won't
transmit the checksum.
To Next Page
Loading...
