Inateck BCST-43 - Shortcut Barcodes and Data Coding

Enter Setup
Exit and Save
43
be hidden, the initial characters for code 128 and code 39 including D, K, P, Q, S,
V, 1P, 1T, 10D, 17V, 2P or 4L will be hidden and won't output. "Hide Special Initial
Character" function is disabled by default.
Hide Special Initial Character
(*) Show Special Initial Character
Use of Shortcut Barcodes
There are two types of shortcut barcodes.
Input Type: With these shortcut barcodes you can quickly input some characters.
Please refer to Appendix I.
Function Type: These shortcut barcodes work either alone or in combination way.
Please refer to the Appendix II and Appendix III.
If the shortcut barcode is enabled and you scan some shortcut barcodes of input
type, BCST-43 will output corresponding characters. When you scan the
shortcut barcodes of function type, BCST-43 will simulate the effect on a
keyboard, like a standalone function key or combination ones.
Enable Shortcut Barcodes
(*) Disable Shortcut Barcodes
Settings of Data Coding Format
To let the host print Chinese data in given code format, you may complete the
setting by reading the "Data Coding Format" barcode. The scanner defaults
outputting data in GBK coding format.
1. Original Data Format, the data coding output format is closely connected with
the code generation environment. The output format can be GBK or UNICODE.
2. The GBK (GB2312) is applicable to software like Notepad, Excel, etc.