Inateck BCST-43 - Upc-E; Enable;Disable UPC-E; Enable;Disable UPC-E1; Enable;Disable Initial Digit of UPC-E

Enter Setup
Exit and Save
33
(*) UPC-A Outputs Number System
Digit
UPC-A Do not Output Number System
Digit
UPC-E
Enable/Disable UPC-E
(*) Enable UPC-E
Disable UPC-E
Enable/Disable UPC-E1
The initial digit of most UPC-E is "0". If you want to read UPC-E barcodes with
initial digit "1", please first enable the UPC-E and then set the "Enable UPC-E1"
barcode. The scanner defaults disabling the UPC-E1.
Enable UPC-E1
(*) Disable UPC-E1
Enable/Disable Initial Digit of UPC-E
(*) Enable Initial Digit of UPC-E
Disable Initial Digit of UPC-E