Inateck BCST-43 - Buffer and Inventory; Buffer Settings; Inventory Function

Enter Setup
Exit and Save
11
Set Auto Sleep Interval as 30min
Set Auto Sleep Interval as 60min
Buffer Settings
When the scanner is out of the transmission range, the barcodes scanned will be
kept in the built-in memory/buffer/cache temporarily.
If you want to upload the data stored in the built-in memory/buffer/cache to
your computer or phone, please double-click the scan button when the barcode
scanner is in the transmission range.
You may choose whether to erase the barcodes stored in the buffer every time
you power on the scanner.
Enable Auto Buffer Storage Clearance
(*) Disable Auto Buffer Storage
Clearance
If you want to auto-upload the barcodes that exist in the buffer when the barcode
scanner reconnects to the device, you may set the"Auto Upload Barcodes in
Buffer"function as enabled.
Enable Auto Upload Barcodes in Buffer
(*) Disable Auto Upload Barcodes in
Buffer
Inventory Function
When under inventory mode, barcodes will be saved in the buffer of the barcode
scanner and can be uploaded for many times as per your need. You can also
erase the barcodes in the buffer after uploading them to your device.