Inateck BCST-43 - Inverted and Special Character Handling; Inverted Barcode and Special Characters

Enter Setup
Exit and Save
42
3. Read the "A" barcode in Appendix I;
4. Read the "6" barcode in Appendix I;
5. Read the "Exit and Save" barcode.
Note: After you set the initial characters by steps above, the BCST-43 will only
recognize the barcodes with specific initial characters. If you want to disable the
function, please read the "Enter Setup" - "Remove the Restriction on Initial
Characters" - "Exit and Save".
Set Initial Characters
Only Read the Barcodes
with Specific Initial Characters
(*) Remove the Restriction on Initial Characters
Read 1D Inverted Barcode
The inverted barcode refers to the 1D barcode with white lines on black ground
(The recognition of different inverted 2D barcodes is set separately.
Recognize Inverted Barcode
(*) Do not Recognize Inverted
Barcode
Hide Special Initial Character
Code 128 and Code 39 may contain some special initial characters to indicate
some sort of parameter of a product. For example, the character "p" as initial
character can indicate "Part Number", and character "Q" can indicate quantity.
The BCST-43 can hide such initial characters. If the initial characters are set to