Inateck BCST-43 - Additional Code Handling; Additional Code Recognition

Enter Setup
Exit and Save
40
Additional Code
Barcodes like EAN-8, EAN-13, ISBN, ISSN, UPC-A and UPC-E can have additional
codes. These additional codes appear on the right of the main code and are
shorter than the main code, which can be 2-5 digits. The BCST-43 will only read
the main code after you disable the additional code.
2-digit Additional Code
You may decide whether to recognize the 2-digit additional code by set this
function that is applicable to EAB-8, EAN-13, ISBN, ISSN, UPC-A, and UPC-E. The
BCST-43 defaults disabling the recognition of 2-digit additional code.
Enable 2-Digit Additional Code
(*) Disable 2-Digit Additional Code
5-digit Additional Code
You may decide whether to recognize the 5-digit additional code by setting this
function which is applicable to EAN-8, EAN-13, ISBN, ISSN, UPC-A and UPC-E. The
scanner defaults disabling the recognition of 5-digit additional code.
Enable 5-digit Additional Code
(*) Disable 5-digit Additional Code
Mode of Recognition Only for Barcodes with Additional Code
The scanner can only recognize the barcodes with additional code if you set the
mode as "Recognition Only for Barcodes with Additional Code".
The scanner can recognize the barcodes without additional code if you set the
mode as "Recognition Not Only for Barcodes with Additional Code".