To disconnect the Bluetooth, please close the serial debugging tool.
To use the Bluetooth SPP mode of BCST-43 on another computer, there is no
more operation needed for BCST-43, just disconnect BCST-43 with the previous
connected computer and then BCST-43 will enter Bluetooth broadcasting mode.
Search for BCST-43 and pair it with another computer. After successful
connection, you need to run the serial debugging tool on the new computer and
follow the steps mentioned previously to open Bluetooth COM Port.
Bluetooth GATT mode is not the default mode. To enter this mode, please scan
“Enter Setup”——”Bluetooth GATT Mode”——”Save and Exit”.
Bluetooth GATT mode provides a communication interface for developing
Bluetooth APP programs. In Bluetooth GATT mode, scanners can be seamlessly
connected with the Bluetooth APP developed by users. When developing
To Next Page
Loading...
