Inateck BCST-43 - Upc-A; Enable;Disable UPC-A; UPC-A Outputs 0; Checksum Code

Enter Setup
Exit and Save
32
Do not Transmit MSI Checksum
UPC-A
Enable/Disable UPC-A
(*) Enable UPC-A
Disable UPC-A
UPC-A Outputs 0
You may decide whether to add a character "0" to the output of UPC-A. The
scanner defaults disabling the 0 output.
UPC-A Outputs 0
(*) UPC-A Do not Output 0
Checksum Code
You may decide whether to transmit checksum code. The scanner defaults
disabling checksum code transmission.
Transmit UPC-A Checksum
(*)Do not Transmit UPC-A Checksum
UPC-A Number System Digit
The first digit of a UPC-A barcode is the number system digit. The scanner default
enabling the output of number system digit. You may disable it as per your needs.