Door seal distortion (Indesit, Creda)
- V&C. Sticking of sensing band to sensing band insula-
tor in two places on drum assembly. This prevents the
sensing band from coming adrift from the insulator.
Part Code C00113838.
S/N is before the 6th of April 2005.
Sensing strip coming adrift
INTERVENTION TO BE PERFORMED
CORRECTIVE ACTIONS
- C. Console Panel tooling modifi ed to prevent over
pushing of Buttons:
- Part code C00112608 Light Guide
- Part code C00112566 On/Off Button.
S/N is before the 25th of July 2005.
Sticking buttons
INTERVENTION TO BE PERFORMED
CORRECTIVE ACTIONS
- V. Circular rib added to door seal to prevent distortion.
Part code C00112143 Door Seal.
S/N is before the 19th of January 2005.
INTERVENTION TO BE PERFORMED
CORRECTIVE ACTIONS
- C. Add new Cable Clip & Strengthening Ribs To IRP
Clips. Part Code C00113887.
S/N is before the 26th of January 2005.
Pump cover becoming adrift
INTERVENTION TO BE PERFORMED
CORRECTIVE ACTIONS
- C. Addition of corner brace to improve left hand side
panel fi t. The brace is secured to the front panel and
to the water container support / side panel. Part code
does not exist yet.
S/N is before the 6th of April 2005.
Side panel gap
INTERVENTION TO BE PERFORMED
CORRECTIVE ACTIONS
- C. Modifi ca del fi ltro per impedirne l’intasamento e spacca-
tura rete, effetto dente di sega. Questa modalità sostituisce
la rimozione del materiale in eccesso “mod. 30”. Codice
ricambio fi ltro modifi cato C00113848.
S/N is before the 19th of April 2005.
Filter jamming
INTERVENTION TO BE PERFORMED
CORRECTIVE ACTIONS
To Next Page
Loading...
