- V&C. Introduction of modifi ed drums with new drum
lifter design. The lifter is shorter and is fastened with
2 screws (previously 3). The new lifter design reduces
the likelihood of warping and improves the security.
- Part Code C00141607 (drum condenser) and
C00142165 (drum vented).
S/N is before the 1st of August 2005.
Side panel alignment
INTERVENTION TO BE PERFORMED
CORRECTIVE ACTIONS
- V. 1 piece front airduct felt seal introduced to improve
the position of the seal on the airduct and ensure all
backing tape is easily removed. Part code C00141600
Felt Seal.
S/N is before the 11th of April 2005.
Lint built-up
INTERVENTION TO BE PERFORMED
CORRECTIVE ACTIONS
- V. Larger diameter front bearing seal introduced to
ensure backing fully removed prior to application:
substitute felt seal with part code C00141600.
S/N is before the 14th of October 2004.
Front seal adrift
INTERVENTION TO BE PERFORMED
CORRECTIVE ACTIONS
- V. Side panel corner improvement, corner is now
rounded instead of a sharp peak. Side panel part code
C00112184.
S/N is before the 22th of August 2005.
INTERVENTION TO BE PERFORMED
CORRECTIVE ACTIONS
Drum lifter security
To Next Page
Loading...
