EasyManuals Logo

Inficon Protec P3000 User Manual

Inficon Protec P3000
128 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
General Safety Precautions 7
Hearing damage from excessively loud signals
The volume of signals can exceed 85 dB(A).
Keep away from the device if the volume has been set to high.
Wear ear protection, when needed.
Do not stare into the LEDs of the sniffer line intentionally for extended times
or at a close distance as this may cause permanent damage to the eye.
Danger of electric shock.
Don’t touch voltaged parts with the sniffer tip. Test samples need to be discon-
nected from electricity before leak testing.
For all contacts of the I/O Port a maximum voltage of 60 V DC or 25 V AC
must not be exeeded or reached to ground or ground equipment conductors.
According to the type of in- or outputs lower voltages had to be accepted. For
this, please refer to the information given in the responding chapters.
For all maintenance on the Protec P3000, the Protec P3000 must be
disconnected from power.
Before exchanging the air filter the Protec P3000 must be disconnected from
power.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Inficon Protec P3000 and is the answer not in the manual?

Inficon Protec P3000 Specifications

General IconGeneral
BrandInficon
ModelProtec P3000
CategoryController
LanguageEnglish

Related product manuals