Inficon Protec P3000 User Manual

Equipment Settings 77
4.7 History & Maintenance
In HISTORY & MAINTENANCE historical data that has been collected during the
operation of the Protec P3000 can be viewed as well as information about the
maintenance status of the leak detector.
View Error List
In the
ERROR LIST all errors (and warnings) that have occurred during the operation
of the Protec P3000 are summarized. In the list the
DATE and TIME when the error
occurred is stated followed by error or warning number (E xx being errors and W xx
being warnings) with a short description of the error or warning. The full error
message or warning may be displayed when scrolling to the appropriate line item and
pressing the magnifying glass-button.
V1: bypass open / close
V2: measure open / closed
V3: purge inlet open / closed
V4: purge sniffer open / closed
V5: sniffer open / closed
V6 / V7:
HIGH FLOW
open / closed / not
installed
for P3000XL only
Air pressure mbar
Normal mode mbar
Gross mode mbar
Zero pressure mbar
Page 10: RS232 Info
Protec P3000  sniffer ASCII string
Command sent from
main unit to sniffer
Sniffer  Protec P3000 ASCII string
Command sent from
sniffer to main unit
Host Protec P3000 ASCII string
Command sent from
host to Protec P3000
Protec P3000  Host ASCII string
Command sent from
Protec P3000 to host
Menu item Format Description

Inficon Protec P3000 Specifications

General

Brand	Inficon
Model	Protec P3000
Category	Controller
Language	English