Inficon Protec P3000 User Manual

74 Equipment Settings
Operation hours h
Serial number 11-digit number
Wise Serial number
Software version x.xx.xx
Circuit temperature °C
Temperature of main
board
Test leak temperature °C
Sensor block Protec P3000 1 / 2 / 3
1 = Protec P3000
2 = Protec P3000 with
extended measurement
range
3 = Protec P3000XL
Page 2: Sensor Global
I akt. A
Leak rate mbar l/s helium leak rate
PWM-Membrane Integer
Heater Voltage V
High Voltage V
Operating time Wise h
Wise Temperature °C
Software Version
Wise Sensor
Wise-State Integer
Measure Background Press button
If pressing the
MEASURE BACKGROUND button the
Protec P3000 will go into a special measurement
mode and determine the background concentration
of Helium currently prevalent in the environment.
This process may take a couple of seconds. This
feature is not a continuous signal display but should
be used for trouble-shooting purposes only.
Page 3: Sensor Errors
Sensor Error Hex Code
Menu item Format Description

Inficon Protec P3000 Specifications

General

Brand	Inficon
Model	Protec P3000
Category	Controller
Language	English