Maintenance 99
1 Depending on the contamination the air filter should be cleaned or replaced as
necessary.
2 Push in new (changed) air filter until fully in contact with dead stop.
3 Close air filter fastener.
4 From the main menu go to
HISTORY & MAINTENANCE / CONFIRM MAINTENANCE and
confirm with the appropriate button on the right side of the display that the air filter
has been replaced / cleaned. The actual date and time as well as the actual
number of operating hours will be saved and a reminder to perform this
maintenance task again will be issued after another 10.000 operating hours.
Fig. 70 Dismounting of the air filter
Fig. 71 Inserting the air filter
To Next Page
Loading...
Need help?
General
