Inficon VGC083A - Connecting the PGE050 - Connectors Labeled 2 and 3

tinb29e1-c (2019-10) VGC083A_B.om 23
The view shown below is the CPC connector end of the IG cable:
VGC083 Connector End of Cable View
Pin/Socket
Contact
Number
Description
(compatible with Granville-Phillips
®
ion gauge cables)
2
Shield, chassis ground
7 FIL 2 (this contact is only present on dual filament IG cables
available from INFICON)
8
FIL COM
11
FIL 1
13
Grid Source (supply)
14 Grid return Used only for I
2
R degas design using the VGC083B
Not used for VGC083A EB-degas design
PN 399-580 … -582 are a custom cable assemblies provided in different lengths
from INFICON for connecting the VGC083 to INFICON PGE050 gauge or MKS
Instruments / Granville-Phillips
®
275 Convectron
®
vacuum gauge sensor. Connect
the DE-9 D-subminiature connector to VGC083 and PGE050 connectors to "2" or
"3".
For your reference, the wiring chart for the PGE050 cable provided by INFICON is
shown below. In addition to INFICON provided standard cable assembly lengths,
INFICON will provide custom length cable assemblies upon request.
VGC083
pin no.
connects to PGE050 gauge pin no.
(INFICON molded, custom connector)
1
⇒
NC
2
⇒
cable shield
3
⇒
3
4
⇒
3
5
⇒
2
6
⇒
5
7
⇒
1
8
⇒
1
9
⇒
NC
4.2.4 Connecting the PGE050 -
connectors labeled "2"
and "3"