tinb29e1-c (2019-10) VGC083A_B.om 11
3 Important Safety Information
INFICON has designed and tested this product to provide safe and reliable service,
provided it is installed and operated within the strict safety guidelines provided in
this manual. Please read and follow all warnings and instructions.
To avoid serious injury or death, follow the safety information in this docu-
ment. Failure to comply with these safety procedures could result in serious
bodily harm, including death, and or property damage.
Failure to comply with these warnings violates the safety standards of installation
and intended use of this instrument. INFICON disclaims all liability for the cus-
tomer's failure to comply with these instructions.
Although every attempt has been made to consider most possible installations,
INFICON cannot anticipate every contingency that arises from various installations,
operation, or maintenance of the instrument.
If you have any questions about the
safe installation and use of this product, please contact INFICON.
This device meets FCC part 15 requirements for an unintentional radiator, class A.
Hazardous voltages are present with this product during normal operation. The
product should never be operated with the covers removed unless equivalent pro-
tection of the operator from accidental contact with hazardous internal voltages is
provided.
WARNING! There are no operator serviceable parts or adjustments inside
the product enclosure. Refer servicing to service trained personnel.
Do not modify this product or substitute any parts without authorization of qualified
INFICON service trained personnel. Return the product to an INFICON qualified
service and repair center to ensure that all safety features are maintained. Do not
use this product if unauthorized modifications have been made.
WARNING! Source power must be removed from the product prior to
performing any servicing.
After servicing this product, ensure that all safety checks are made by a qualified
service person. When replacement parts are required, ensure that the parts are
specified by INFICON Substitutions of non-qualified parts may result in fire, electric
shock or other hazards. Use of unauthorized parts or modifications made to this
product will void the warranty.
To reduce the risk of fire or electric shock, do not expose this product to rain or
moisture. These products are not waterproof and careful attention must be paid to
not spill any type of liquid onto these products. Do not use these products if they
have been damaged. Immediately contact INFICON to arrange return of the pro-
duct if it is damaged.
Due to the possibility of corrosion when used in certain environmental conditions, it
is possible that the product’s safety could be compromised over time. It is important
that the product be periodically inspected for sound electrical connections and
equipment grounding. Do not use if the equipment grounding or electrical insulation
has been compromised.
Ensure the enclosure of the unit is connected directly to a good quality earth
ground.
Ensure that the vacuum port on which the vacuum gauge sensors are mounted is
electrically grounded.
When using the BAG050 / 051 / 052 / 053 use a power source of 20 … 28 V (dc),
200 W or use INFIOCN series optional power supplies.
3.1 Safety Precautions -
3.2 Safety Precautions -
To Next Page
Loading...
