6 tinb29e1-c (2019-10) VGC083A_B.om
1 Introduction / General Information
The Vacuum Gauge Controller VGC083A is a vacuum pressure measurement
system which is comprised of the following:
• The VGC083A Vacuum Gauge Controller
• One INFICON BAG050 nude UHV EB-degas Bayard-Alpert hot cathode
ionization gauge (IG) or other brands of nude UHV EB-degas B-A gauges or
INFICON BA055 Bayard-Alpert hot cathode Mini IG
• One or two INFICON PGE050 convection enhanced pirani heads
1)
• Cables to interconnect the VGC083A and point-of-use devices
1)
The VGC083A will also operate the Granville-Phillips
®
Convectron
®
convection enhanced pirani
vacuum gauge head.
Typical components of the complete vacuum measurement system are shown in
the figure below. The VGC083A provides power and operating control for the
BAG050 / 055 hot ion gauge head (IG). Additionally, it provides power and
operating control for up to two enhanced convection gauges (CG).
VGC083A Vacuum Gauge
Controller
BAG050 Nude Ion Gauge
or
BAG055 Mini Ion Gauge
PGE050 Convection Gauges
1 & 2 (CVG 1 & 2)
The VGC083A, a controller unit capable of controlling multiple gauge heads, is
either rack or instrument panel mountable. Optional industry standard 19-inch, 2U
high rack-mount panels are available to mount the unit into rack enclosures. For
important information about the PGE050 convection gauge please refer to the
PGE050 Operating Manual. Read the Operating Manuals in their entirety for any
device you intend to connect to the VGC083A prior to connecting and using the
external devices and cables that the VGC083A is intended to be used with.
Typical Components of the
complete Vacuum Pressure
To Next Page
Loading...
