tinb29e1-c (2019-10) VGC083A_B.om 43
[Factory default = 1.00E-06]
(RELAY 4 LO TRIP; same info as RELAY 1 LO TRIP above)
[Factory default = 2.00E-06]
(RELAY 4 HI TRIP; same info as RELAY 1 HI TRIP above)
[Factory default = 1.00E-01]
(RELAY 5 LO TRIP; same info as RELAY 1 LO TRIP above)
[Factory default = 2.00E-01]
(RELAY 5 HI TRIP; same info as RELAY 1 HI TRIP above)
[Factory default = 1.00E-01]
(RELAY 6 LO TRIP; same info as RELAY 1 LO TRIP above)
[Factory default = 2.00E-01]
(RELAY 6 HI TRIP; same info as RELAY 1 HI TRIP above)
[Factory default = 0.0 SECONDS]
Depending on the age of your controller this relay delay time menu may not be
available in your product. In certain process control schemes, it may be desirable
to have a delay period between the time the pressure reaches the REL 1 LO TRIP
point value described above and Relay 1 gets turned on. REL 1 LO DELY menu
provides the user the ability to set such delay time in seconds.
[Factory default = 0.0 SECONDS]
Depending on the age of your controller this relay delay time menu may not be
available in your product. In certain process control schemes, it may be desirable
to have a delay period between the time the pressure reaches the REL 1 HI TRIP
point value described above and Relay 1 gets turned off. REL 1 HI DELY menu
provides the user the ability to set such delay time in seconds.
[Factory default = 0.0 SECONDS]
(REL 2 LO DELY: same info as REL 1 LO DELY above)
[Factory default = 0.0 SECONDS]
(REL 2 HI DELY: same info as REL 1 HI DELY above)
[Factory default = 0.0 SECONDS]
(REL 3 LO DELY: same info as REL 1 LO DELY above)
[Factory default = 0.0 SECONDS]
(REL 3 HI DELY: same info as REL 1 HI DELY above)
[Factory default = 0.0 SECONDS]
(REL 4 LO DELY: same info as REL 1 LO DELY above)
[Factory default = 0.0 SECONDS]
(REL 4 HI DELY: same info as REL 1 HI DELY above)
[Factory default = 0.0 SECONDS]
(REL 5 LO DELY: same info as REL 1 LO DELY above)
To Next Page
Loading...
