Infineon TRAVEO T2G family CYT4D Series - 2.4 Basic clock system settings

Application Note 11 of 80 002-26071 Rev. *B
2021-09-07
Clock configuration setup in TRAVEO™ T2G family CYT4D series MCUs
Clock system for TRAVEO™ T2G family MCUs
2.4 Basic clock system settings
This section describes how to configure the clock system based on a use case using the sample driver library
(SDL) provided by Infineon. The code snippets in this application note are part of the SDL. See Other
references.
The SDL has a configuration part and a driver part. The configuration part configures the parameter values for
the desired operation. The driver part configures each register based on the parameter values in the
configuration part. You can configure the configuration part according to your system.