EasyManuals Logo

InFocus X16 Reference Guide

InFocus X16
54 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #48 background imageLoading...
Page #48 background image
Maintenance48
13. Restart the projector.
CAUTION
Do not turn the power on with the lamp cover removed.
Resetting the lamp timer
14. After the startup logo, open the On-
Screen Display (OSD) menu. Go to the
SYSTEM SETUP: Advanced > Lamp
Settings menu. Press MODE/ENTER.
The Lamp Settings page displays.
Press to highlight Reset lamp timer
and press MODE/ENTER. A warning message displays asking if you want to
reset the lamp timer. Highlight Reset and press MODE/ENTER. The lamp
time will be reset to '0'.
CAUTION
Do not reset if the lamp is not new or replaced as this could cause damage.
9. Tighten the screw that secures the
lamp.
CAUTION
Loose screw may cause a bad connection,
which could result in malfunction.
Do not over tighten the screw.
10. Ensure the handle is fully laid flat
and locked in place.
11. Replace the lamp cover on the
projector.
12. Tighten the screws that secure the
lamp cover.
CAUTION
Loose screw may cause a bad connection,
which could result in malfunction.
Do not over tighten the screws.
Reset Lamp Timer?
Reset
Cancel
Notice

Table of Contents

Other manuals for InFocus X16

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the InFocus X16 and is the answer not in the manual?

InFocus X16 Specifications

Display IconDisplay
native resolution800 x 600
display technology0.55” LVDS DLP DMD
brightness2400 lm
Connectivity IconConnectivity
input sourcesVGA (HD15), S-video, Composite Video, Audio (3.5mm), RS232
output sourcesVGA (HD15)
controlPC control through RS232
Video Compatibility IconVideo Compatibility
computer compatibilityVGA(640x480), SVGA(800x600), XGA(1024x768), SXGA(1280x1024), SXGA+(1400x1050)
video compatibilityNTSC, NTSC 4.43, PAL, PAL-M, PAL-N, SECAM, SDTV(480i/576i), EDTV(480p/756p), HDTV(720p1080i)
aspect ratio4:3/16:9
Projection IconProjection
minimum projection distance1.5 ~ 6m
lens offset120%
image size0.75m ~ 6.5m (27” ~ 252")
Power and Consumption IconPower and Consumption
power consumption285W (typical) / 5W in standby
power supply100~240Vac, 50/60Hz
lamp185W / 4000 hours (Eco mode)
Operating Environment IconOperating Environment
operating temperature5 – 35°C
audible noise29dB
brightness uniformity80%
Weight and Dimensions IconWeight and Dimensions
product dimensions225 x 113 x 264mm
product weight5.3 lbs (2.4 kg)
product colorBlack

Related product manuals