Infortrend S12F-G1842 - Page 148

EonStor / EonStor DS S12/S16/S24 Series
5. Insert the
replacement module. Make sure the side clips are in the open
e DIMM
module into the socket. The side clips will close automatically and secure the
positions. Align the DIMM module with the socket and firmly push th
DIMM module into the socket.
6. (If applicable) Reinstall the BBU module (refer to Replacing the BBU
).
7. Reinstall the controller module into the chassis (refer to Replacing the Controller
Module).
148