Terminal User Guide
Page 11
iWL250 User Guide
Copyright© 2019 Ingenico
In order to use a telephone connection, connect one end of the UK Telephone
Cable to the telephone socket on your base unit (marked MODEM / TEL IN); the
other end should be plugged into an analogue telephone line (BT) socket.
In order to use a LAN connection, connect one end of an Ethernet cable into the
Ethernet socket on your base unit; the other end should be connected to a
corresponding socket on your LAN/router.
Finally connect the UK Power Supply Unit into the power socket on your base unit
and to the mains power. Your terminal is charged by placing it, securely, on to
your base unit. Your base unit must be connected to the power supply in order to
charge your terminal.
Your terminal will automatically turn on when placed on your base unit. To
indicate that the terminal has power to it, the power icon will be displayed on
the screen.
To Next Page
Loading...
