Terminal User Guide
Page 19
iWL250 User Guide
Copyright© 2019 Ingenico
WiFi Setup
Wi-Fi terminals must only be connected to a Wi-Fi network operating with either
WPA or WPA2 Wi-Fi security standards; you should contact your IT provider if
you wish to check or amend your Wi-Fi network’s configuration.
To enter the Wi-Fi configuration tool, press the menu key twice, and then choose
SUPERVISOR by pressing the F3 key. You will be asked to type your current
supervisor password and confirm this by pressing the enter key. Press the menu
key, choose SHORT CUT by pressing the F1 key, press the menu key once more
and choose WIFI SETUP by pressing the F1 key.
MENU, MENU, F3, [password], ENTER, MENU, F1, MENU, F101/01/19ou can
use the up, down and enter keys to select the desired option:
NEW PROFILE
Create a new saved Wi-Fi connection profile.
ACTIVE PROFILE
Selects an existing saved Wi-Fi connection profile.
MODIFY PROFILE
Edit an existing saved Wi-Fi connection profile.
REMOVE PROFILE
Remove an existing saved Wi-Fi connection profile.
Multiple Wi-Fi connection profiles (for different Wi-Fi networks) may be saved in
your terminal, allowing the most appropriate Wi-Fi network to be used, at any
given time, based on availability and the priority weighting associated to each Wi-
Fi connection profile.
To Next Page
Loading...
