Terminal User Guide
Page 16
iWL250 User Guide
Copyright© 2019 Ingenico
Bluetooth Association
Bluetooth terminals will be supplied already paired with the base unit provided;
your terminal can only use the telephone and Ethernet connections when it is
paired to the base unit.
To associate your terminal to a Bluetooth base, press the menu key twice, then
choose SUPERVISOR by pressing the F3 key. You will be asked to type your
current supervisor password, and confirm this by pressing the enter key. Press
the menu key and choose SHORT CUT by pressing the F1 key, followed by the
BLUETOOTH by pressing the F4 key.
MENU, MENU, F3, [password], ENTER, MENU, F1, F4 01/01/19You can then
use the up, down and enter keys to select the desired option:
NEW BASE
Pair your terminal to a new base unit.
SELECT BASE
Select base unit from list of paired bases units.
REMOVE BASE
Remove the association with an old base unit.
PRINT BASES
Print a confirmation of paired base units.
Bluetooth terminals can only be paired with a compatible
Bluetooth base unit that is powered on.
To Next Page
Loading...
